Space Saver Beam Instructions - 19939-100C (08/17)
Copyright 2016, Creative Playthings - Printed in U.S.A.
Page 6
STEP SIX - Gym Braces
Fasten one Gym Brace (D) to the end of the right Base Exten-
sion (C) using two 5/16 x 4" Hex Bolt Assemblies, as shown.
Secure the Gym Brace to one Corner Post using one 3/8 x
4" Lag Screw and one 3/8" Flat Washer through the top hole
on the Gym Brace. (Drill 1/4" diameter pilot hole in the Post
for the Lag Screw).
Repeat with the remaining Gym Brace below the other end
of the Beam.
STEP SEVEN - Safety Rail
Locate the Safety Rail appropriate for the gym. The 59-1/2"
Safety Rail (A) is for the Williamsburg gym. The 83-1/4"
Safety Rail (B) is for the Lexington gym.
The Safety Rails are placed to keep children playing inside
the gym from inadvertently stepping in front of a moving
swing. One Safety Rail is included with the gym.
Fasten the Safety Rail to the Corner Posts on the side of the
gym adjacent to one swing position using two 5/16 x 3" Lag
Screws with 5/16" Flat Washers as shown. If the other Safety
Rail is not yet in place, install it in the same way on the other
side of the gym, adjacent to the other swing.
Use the Posts have pre-drilled pilot holes 24" above the
ground.
C
A or B
D
