www.cls-led.com
CLS Dennis RGB Wallwasher
- 4 -
- 3 -
Main Features LEd’s
CLS Dennis RGB Wallwasher uses three types of Luxeon® LED’s (Red, Green and Blue).
• 7 Blue Luxeon® III LED’s.
• 18 Green Luxeon® III LED’s.
• 24 Red Luxeon® I LED’s.
Lenses
Each Luxeon® LED is fitted with a 25° high efficiency lens.
Functions:
• RGB colour mixing.
• Linear dimmer.
• Adjustable strobe effects.
• Preset (on Macro) colour and rainbow effects.
• Settings via on-board microcomputer viewable on the unit’s display.
• Display “flip” function (rotates text 180°).
• Adjustable display brightness.
• Elapsed time meter for each colour channel (Red, Green and Blue).
• General fixture operating time meter.
• Panel with LED display and three buttons
control signals
• DMX 512 input signal.
• Stand-alone operation with built-in programs.
• Day to day control of the on-board programs on a weekly basis.
• Stand-alone operation of systems with up to 30 fixtures, via Master – Slave.
InStALLAtIon
Mounting the fixture
CLS Dennis RGB Wallwasher is controllable with a DMX 512 signal according to the USITT DMX 512/1990.
Cables for DMX connection are fitted with standard XLR 3-Pin connectors.
Installation and positioning
CLS Dennis RGB Wallwasher can be permanently mounted, in the case of fixed installations, by means of
the four holes on it’s base. The distance between the holes is 340 mm on the front and 195 mm on the
side.
The required movement is fixed by means of the screws on the head support. The hex keys for fixing PAN
and TILT are supplied with the fixture and are (respectively) 8 mm and 3 mm keys.
Addressing the fixture
Push the “
uP
” button.
“
A***
” will appear on the display, showing that the fixture is addressed to DMX channel
***
.
To change the DMX address:
• Press the
uP
key. The message
A***
will appear.
• Press
Enter
and “
***
” will begin to flash.
• Use the
uP
and
down
keys to choose the required address channel.
• Press
Enter
again to confirm.
CLS Dennis RGB Wallwasher requires 8 DMX channels for control of all it’s functions.
oPErAtIon
controlling the fixture via dMX
The following table shows the control channels of the CLS Dennis RGB Wallwasher.
channel dMX
Function
description
Ch 1
Shutter/Strobe
Shutter and strobe functions are adjustble and random Pulse Functions
Ch 2
Dimmer
Luminous itensity control
Ch 3
Red
Continuous Red saturation control 0-100%
Ch 4
Green
Continuous Green saturation control 0-100%
Ch 5
Blue
Continuous Blue saturation control 0-100%
Ch 6
CTC
Continuous colour temperature control
Ch 7
Macro
Macro functions
Ch 8
Mod_Colore
White balance
control
!
W
ARNING
ATTENTION!
Do not use more than 32 fixtures on one DMX line! Should it be
necessary to connect a larger number of fixtures, there must be
used a splitter/buffer for each 32 fixtures, to ensure that the signal
quality remains unchanged.
!
W
ARNING
ATTENTION!
If the flashing message NO SIGNAL or SIGNAL ERROR
appears, this means that the fixture is not receiving a DMX
signal or is receiving an incorrect signal.
