Phase Hardware
Phase Hardware
L (8)
Green L-Bracket
M002 (4)
TOWER “B”
1 1/4" Deck Screws
A1 (4)
Phase Parts
(1) 1/16 x 2-3/4 x 44-11/16 BRIDGE SUPPORT STRAP
M301
5/16” x 1 1/2” Lag Bolt
M (4)
5/16” SPLIT
WASHER
D1 (4)
5/16” T-NUT
T (4) 5/16" x 3-1/4” HEX BOLT
K1 (12)
5/16“ FLAT
WASHER
Bridge Tower Prep: Attach Brackets
Step 1: Align large (2) large holes in M301 Support Strap with holes in WZ3259.
Step 2: Mark and drill (4) 5/16” holes thru upgrights, (2) on each upright
Step 3: Insert (4) 5/16” T-nuts into backside of uprights
Step 4: Attach M301 Support Strap with (4) 1-1/4” deck screws &
(4) 5/16 X 3-1/4” Hex bolt, split washer & washer
Step 5: Attach (4) M002 brackets as shown with (2) 1-3/4 tapping screw per bracket
(2) 5/16" T-NUTS
PER UPRIGHT
(4) 3-1/4"
5/16” HEX HEAD
(4) 5/16"
SPLIT WASHERS
(4) 5/16"
FLAT WASHERS
(4)1-1/4"
DECK SCREWS
20
Phase 30:
BRIDGE ASSEMBLY
5/16" x 6”
DRILL BIT
ALIGNMENT
HOLE
ALIGNMENT
HOLE
UNDER DECK VIEW
(2) M002
BRACKETS
PER CORNER
(2) 1 1/2" LAG BOLT
& 5/16 FLAT WASHER
PER BRACKET
