Packing List
After unpacking the product, please make sure that the �D printer is intact and confirm whether the accessories are complete
according to below list.
Appearance
PLA filamentx�
Filament holderx�
Door panelx�
SD cardx�、
Card readerx�
Glass platformx�
Spannerx�
tweezerx�
Required reading
Step �
Turn on the printer
Power interface
Switch
Metal button
�
�d printerx�
power cablex�
shovelx�
Door hingex�
Screws（M�*�）x�
Touch screen
Extruder
Printing
platform
SD Card slot
Plug the power cord into the power connector on the back of the machine and then into the socket. Press the power switch
and the round metal button on the front of the machine. The startup interface is displayed normally, indicating that the �D
printer has started normally.
