Create WIND FOLD, Manual

Page: 17 / 24

17 ENGLISH
O
4
7
5
8 9
6
Join the part connections B with the connections of
engine, each with its corresponding color.
Once the cables are con-
nected, insert the part B in-
side the piece K , As shown
in the picture.
Select and connect all
ground wires, including your
installation.
You will need to attach the
remaining wires from the
piece B. and the phase and
neutral cables of its instal-
lation in the strip of the
piece K , as it's shown in the
following.
Once connected, place the
part O screwing it on until it
is secure.
K
1 2 3
Put the tilt bracket into the
slot on the part K .
Remember to set the notch
on the tilt bracket back so
that the piece fits snugly.
Before continuing, check
that the central structure is
well placed so that it does
not fall.