manualshive.com logo in svg

Create Room DREAMBOX, Manual, Page: 33 / 44

Share
Download
Create Room DREAMBOX Manual Download Page 33

Proprietary, patented product and assembly instructions. Do not copy or distribute.

Proprietary, patented product and assembly instructions. Do not copy or distribute.

in each divider.

Use ONLY a MANUAL phillips 
screw driver.

Install 

(2) angle brackets 

using

 (8) #5 14mm washer 

screws. 

Proprietary, patented product and assembly instructions. Do not copy or distribute.

in each divider.

Use ONLY a MANUAL phillips 
screw driver.

Install 

(2) angle brackets 

using

 (8) #5 14mm washer 

screws. 

Proprietary, patented product and assembly instructions. Do not copy or distribute.

in each divider.

Use ONLY a MANUAL phillips 
screw driver.

Install 

(2) angle brackets 

using

 (8) #5 14mm washer 

screws. 

29

Proprietary, patented product and assembly instructions. Do not copy or distribute.

RS1

te

kc

o

P 

g

ni

wS 

BL

RS2

RS1

te

kc

o

P 

g

ni

wS 

BL

Back Panel

RS2

RS Lid

RS Lid

Pock

et Shelf

Place RS2 on top of Lid and Pocket
and fit over Connecting Bolts with 
Locking Cams. Tighten 2 Locking Cams
on Lid and 2 Locking Cams on Pocket.

Two people are needed for this step. 
Lift up RS2 slightly to slide the Back Panel
into the grooves of RS1 and RS2. Slide
Back Panetoward Lid until secure.

4

5

Summary of Contents for DREAMBOX













































Reviews:

No comments