manualshive.com logo in svg

Create Room DREAMBOX, Manual, Page: 23 / 44

Share
Download
Create Room DREAMBOX Manual Download Page 23

Proprietary, patented product and assembly instructions. Do not copy or distribute.

Box 5

 includes: Left Swing Door Side 1 (LS1), Left Swing Door Side 2 (LS2), Right Swing 

Door Side 1 (RS1), Right Swing Door Side 2 (RS2), Left Swing Door Lid (LS Lid), Right 
Swing Door Lid (RS Lid), Swing Door Base (S Base)(2), Swing Back (S Back), 
(10) Swing Adjustable Shelves (S Shelf)

Box 8: 

Pocket Shelf (2)

 

LEFT AND RIGHT SWING DOORS: BOX 5 and BOX 8

Our furniture is 

designed to be built 

with two people.

Please do not try to 

build alone.

A Friend

(not included)

Hardware you’ll need:

Tools you’ll need:

Phillips

Screw Driver

Electric Drill with

 

socket extensions

 

or 10mm wrench

 

Allen Wrench

(included)

F20

x10

Offset Hinges

x24

Connecting

Bolts

x2

Closed Swing

Door Catch

(screws included)

x2

Open Swing

Door Catch

(screws included)

x12

Metal 

Hooks

x70

#1: 13mm 

Euro Screws

x2

Door Handles

x20

Swing Door

Shelf Supports

Summary of Contents for DREAMBOX













































Reviews:

No comments