11
Pulse Width
This is where you set the oscillator’s pulse width. To hear what your
setting sounds like you need to turn on the pulse waveform in the
audio mixer. The range extends from 50% to 5% of the pulse width.
Pulse Width Modulation
With this setting you can use modulation to change the pulse width.
You can set either the sine wave LFO or the ADSR envelope as the
modulation source. The knob determines the intensity of the modu-
lation.
Frequency Modulation
Each of the oscillators has two inputs for frequency modulation. As
modulation sources, you can choose either the sine or square wave
LFO for Oscillator 1 as the first modulation input and the sample/
hold function or the ADSR envelope as the second modulation
input.
Oscillator 2 allows you to select either the sine LFO or the output of
the sample/hold mixer as the first input and the sample/hold function
or the ADSR envelope as the second modulation input; you could
also choose the connected foot slider as the first modulation input
(read the description below). Use the knobs to set the intensity of
the modulation.
