22
32
Regular Maintenance:
Clean and Lubricate the Z Axis lead screw.
Dust and stray wisps of filament can adhere to the lead screw, wipe it off with a cloth and apply a small amount of lubricant to keep
everything running smoothly. A dry lubricant, PTFE based is recommended.
Nozzle Wear
The hole in the Nozzle will slowly wear away by the passage of the molten filament through it. The wear rate can be greatly
increased by the use of some filaments containing fibres or particles such as wood, metals etc. Note that nozzle wear is normal
wear and tear and is not covered by the product warranty!
Bowden tube degradation
With repeated heating and cooling the Bowden tube can degrade inside the hot end over time and may need replacing occasionally.
This degradation is increased by continuous use of high melting temperature filaments. Note that this is normal wear and tear and is
not covered by the product warranty!
