Creality CR-Laser Falcon, User Manual

Page: 16 / 20

指示灯状态说明
Indicator Status
1.Light off: The machine is in a power-off state, or the power is abnormal.
2.Breathing light: The machine is in standby mode, you can press the microswitch to enter preview mode or engraving
mode.
3.Light flashes: the machine is in upgrade mode or abnormal mode, and the buzzer beeps rapidly, and it will automatical-
ly enter standby mode after the upgrade is completed or the abnormality is cleared.
4.Light always on: the machine is in preview mode or engraving mode. The laser head is working, please pay attention to
safety
1. 指示灯灭：机器处于断电状态，或上电异常。
2. 呼吸灯效果：机器处于待机模式，可按下微动开关进入预览模式或雕刻模式。
3. 指示灯闪烁：机器处于升级模式或异常模式，同时蜂鸣器发出急促的响声，等待升级完成或清除异常后自动进入待机模式。
4. 指示灯常亮：机器处于预览模式或雕刻模式，此时激光头处于出光状态，需格外注意安全。
异常处理
Exception Handling
In preview mode and engraving mode, if the machine turn on it side or moves, it will turn off the laser.
Motor stops moving, indicator light flashing, and buzzer emits alarm.
Solution: Please move the machine to its original position and press microswitch on the machine control
box to continue previewing or engraving after clearing abnormality.
1. 在预览模式以及雕刻模式中，如果机器发生侧翻异常或移动，机器会关闭激光，电机停止运动，指示灯闪烁，同时蜂鸣器发出急
促响声进行报警。
处理办法：请将机器恢复至原来位置，清除异常后按下机器控制盒上的微动开关继续预览或雕刻。