Creality CR-Laser Falcon, User Manual

Page: 13 / 20

Assemble the laser module
：
Assemble the laser module into the fixing plate and the fixed focus bar should
contact with the surface of the processed material when it is naturally vertical downward.Finally lock it with
two hand screws on the right and turn the fixed focus bar clockwise until it is attracted by the magnet.Finally
plug in the laser module cord.
5. 安装激光模组：将激光模组安装至固定板中，定焦条自然垂直向下时应与雕刻材料表面互相接触，最后使用右侧的手拧螺丝将其
锁紧 , 并顺时针拨动定焦条直至被磁铁吸住。最后插上激光模组线。
软件安装及使用
Software installation and usage guide
The TF card that comes with the machine contains the tutorials of LightBurn and LaserGRBL.You can get
the relevant information from the TF card.
随机器附赠的 TF 卡中包含了 LightBurn 以及 LaserGRBL 的使用教程，您可以通过电脑从 TF 卡中获取相关信息。
激光模组线
laser module cord