10.
12.
Step inside the Hexa Binding.
13.
Adjust the Hexa footstrap with the velcros for the best fit.
14.
If further adjustments for the angle of the binding is needed, loosen
the screws a little until the Hexa Binding is able to spin. Adjust the angle
again to the desired position and fully tighten the screws.
16.
Enjoy the ride
15.
If further adjustments for the footstrap position and footpad
position are needed, undo the screws completely. Lift up the Hexa
Binding, push the Quttro Stix down so they pop out of the Fusion Frame.
Adjust the Quattro Stix to the desired position and pop them back in the
Fusion Frame. Mount the Hexa Binding back on the board to the
desired position and fully tighten your screws.
Summary of Contents for Hexa Binding
Page 1: ...USER MANUAL...
