![background image](http://html1.mh-extra.com/html/crary/air-reel/air-reel_owners-manual_2679348034.webp)
PN 12071 R122210
30
ASSEMBLY
4.19 ELECTRICAL WIRING
1. Mount the switch plate assembly in a convenient place
inside the cab (use either velcro or bolts).
2. Run the red wires (with fuse-15 Amp & 6 Amp) to a
power source. Use actuator switch harness (if provided)
and combine is equipped with same type of auxiliary
power supply.
3. Run the black wires to a suitable ground or to the actua-
tor switch harness ground wires.
4. Route the long harnesses along the combine and
header to the actuators (15
Amp Manifold Tilt; 6 Amp
Air Volume) and plug in (Figure 35).
5. Mount the intermediate harness connectors to a con-
venient location on the combine feeder house.
Place all controls in neutral or off, stop combine engine,
set parking brake, remove ignition key, wait for all mov-
ing parts to stop, then properly block machine before
servicing, adjusting, repairing, or unplugging.
WARNING
Figure 35: Switch/mount plate assembly
SWITCH/MOUNT PLATE ASSEMBLY
(MOUNT INSIDE COMBINE CAB)
FAN BUTTERFLY ACTUATOR
(TO 6 AMP HARNESS)
MANIFOLD TILT ACTUATOR
(TO 15 AMP HARNESS)
ACTUATOR SWITCH HARNESS
(USED ONLY IF COMBINE EQUIPPED WITH
SAME AUXILIARY POWER PLUG)
(RED WIRES TO FUSE WIRES/BLACK TO GROUND)