Crane Prosser Hymergible 3HPV, Installation And Operation Manual

Page: 4 / 14

4
DISCHARGE ..................... 3" Female NPT
SOLIDS HANDLING ......... 2-1/2" (64mm)
MAX FLOW ....................... 375 GPM
MAX HEAD ....................... 58 Ft.
HYDRAULIC INPUT .......... 7 GPM Max.
HYDRAULIC PRESS ........ 2500 PSI Max.
HARDWARE ..................... 300 Series Stainless Steel
IMPELLER ........................ Vortex, Fully Recessed,
Ductile Iron
WEAR RING ...................... Ductil Iron
VOLUTE ............................ 356T6 Aluminum
TOP COVER ..................... 356T6 Aluminum
SEAL Material ........ Rotating Faces - Carbon
Stationary Faces - Ceramic
Elastomer - Buna-N
Hardware -300 Series Stainless
WEIGHT .................................. Pump: 28 lbs. / 12.7 kg.
SECTION: A - PUMP SPECIFICATIONS:
inches
(mm)
IMPORTANT !
1.) PUMP MAY BE OPERATED “DRY” FOR EXTENDED PERIODS WITHOUT DAMAGE TO MOTOR AND/OR SEALS.
2.) THIS PUMP IS APPROPRIATE FOR THOSE APPLICATIONS SPECIFIED AS CLASS I DIVISION II HAZARDOUS LOCATIONS.
3.) THIS PUMP IS NOT APPROPRIATE FOR THOSE APPLICATIONS SPECIFIED AS CLASS I DIVISION I HAZARDOUS LOCATIONS.
4.) INSTALLATIONS SUCH AS DECORATIVE FOUNTAINS OR WATER FEATURES PROVIDED FOR VISUAL ENJOYMENT MUST BE INSTALLED IN
ACCORDANCE WITH THE NATIONAL ELECTRIC CODE ANSI/NFPA 70 AND/OR THE AUTHORITY HAVING JURISDICTION. THIS PUMP IS NOT
INTENDED FOR USE IN SWIMMING POOLS, RECREATIONAL WATER PARKS, OR INSTALLATIONS IN WHICH HUMAN CONTACT WITH PUMPED
MEDIA IS A COMMON OCCURRENCE.