Frozen Gourmet Programming Guide
4550000
9
SELECT BILL VALIDATOR
1.
Press
, then press
until one of the following is displayed:
-.#!5
-
No bills will be accepted or there is no bill validator installed (you
can exit the function).
2$1
-
The serial bill validator is selected and will accept $1, $2, $5, $10,
and $20 bills. Use BILL SELECTION METHOD below to
change the bills which will be accepted.
,#!
-
A standard MDB bill validator is selected. It will accept $1, $2,
$5, $10 and $20 bills. Use BILL SELECTION METHOD below
to change the bills which will be accepted.
BILL SELECTION METHOD:
The standard $1, $2, $5, $10 and $20 bills are enabled by pressing
the 1, 2, 5, 6, or 7 key(s), respectively, to display which bill(s) will
be accepted.
,#! <*>
-
An MDB bill validator which accepts coupons or non-standard
bills (normally used for non-U.S. currency) is connected and
operating. Press
to enter list of bills. See BILL LIST
OPERATION. See INITIAL SETUP OF NON-STANDARD
BILL VALIDATOR.
INITIAL SETUP OF NON-STANDARD BILL
VALIDATOR:
Connect the bill validator, select MDB in the bill
validator selection screens. The standard
MDB.1.2.5.10.20
screen will appear first. Exit the
bill validator setup by pressing
. Bill
information is now collected from the validator.
Re-enter the bill validator selection screen and the
non-standard screen
MDB.
<
*
>
will appear.
