Crane EE-8079, Instruction Manual, Page: 7 / 11

5
TECHNICAL SPECIFICATIONS
Maximum Power 1500W
Heat Power Settings 800W / 1500W
Voltage 120 VAC / 50Hz
Noise Level <50dB (A)
ASSEMBLY & OPERATION:
CAUTION:
Do not use this heater if any part has been under water. Immediately contact Crane
Customer Care or a qualified electrician to inspect or replace the heater if
necessary. Keep plastic wrapping away from children.
ALWAYS USE CAUTION WHEN HANDLING THE TOWER HEATER. DO NOT DROP HEATER
OR COVER THE HEAT GRILL.
ASSEMBLY:
1. Open the packaging, take the unit out and unscrew the Cover Fixer. Be
responsible when handling the packing materials.
2. Insert the Glass Base into the bottom of the unit and screw on the Cover Fixer.
3. Place the unit upright on a flat floor before use.
OPERATING INSTRUCTIONS
1. Press the power icon to turn on the heater. Press it again to turn it off.
2. When the unit is on
a. Press I or II to switch from LOW to HIGH power.
b. Press the double sided arrow to switch the oscillation feature ON or OFF.
c. Press H / °F to set the time & temperature:
i. Press once, then use +/- to set the timer from 1HR to 12HR.
ii. Press twice, then use +/- to set the temperature from 59°-95°F. The
temperature will adjust by 1° each time.
iii. Press a third time to confirm the set time / temperature. The display
will then read the current room temperature and automatically
maintain the set temperature by turning the heating elements on
and off during the set time.
iv.
NOTE: If you touch the sensor H / °F the control light will flash for a time of 5 seconds. If
you do not press any button within 5 seconds or you press a button other than SET, + or -,
then the LED display will display the temperature in the room.
When the temperature in the room is lower than 15°F, the display will show LO. When the
temperature in the room is higher than 99°F, the display will show HI. When the
temperature is in the range of 15 – 99°F, the display will show the actual temperature in
the room.