Crane Barnes SGVF Series, Installation Manual

Page: 4 / 20

4
DISCHARGE ....................... 1¼” NPT, Vertical, Bolt-on Flange
LIQUID TEMPERATURE .... 104°F (40°C) Continuous
MOTOR HOUSING ............. Cast Iron ASTM A-48, Class 30
VOLUTE .............................. Cast Iron ASTM A-48, Class 30
SEAL PLATE ...................... Cast Iron ASTM A-48, Class 30
IMPELLER:
Design ............ 12 vane, vortex, with pump out vanes
on back side. Dynamically balanced,
ISO G6.3
Material ........... 85-5-5-5 Bronze
SHREDDING RING ............. Hardened 440C Stainless Steel
Rockwell C-55
CUTTER .............................. Hardened 440C Stainless Steel
Rockwell C-55
SHAFT ................................. 416 Stainless Steel
SQUARE RINGS ................. Buna-N
HARDWARE ....................... 300 Series Stainless Steel
PAINT .................................. Air dry enamel, top coat
SEAL Design ............. Tandem Mechanical, oil fi lled
reservoir
Material ........... Rotating Faces - Carbon
Stationary Faces - Ceramic
Elastomer - Buna-N
Hardware - 300 series stainless steel
CORD ENTRY ..................... 30 Ft. (9.1M) Cord, Custom Molded
Quick Connected for sealing and
strain relief. Other lengths available,
include 8FT. (2.4M), 50FT. (15M),
75Ft. (23M), and 100FT. (30.5M)
CORD .................................. CSA/UL Approved 12/4 Type SOW
SPEED ................................ 3450 RPM, 60Hz (nominal)
2850 RPM, 50Hz
UPPER BEARING:
Design ............. Single Row, Ball, Oil Lubricated
Load ................ Radial
INTERMEDIATE BEARING:
Design ............. Single Row, Ball, Oil Lubricated
Load ................ Radial & Thrust
LOWER BEARING:
Design ............. Sleeve, Oil Lubricated
Load ................ Radial
MOTOR: Design ............. NEMA L, Single phase, (SGVF2022L
or SGVH2022L includes overload
protection in the motor).
NEMA B, Three Phase Torque Curve,
Oil Filled, Squirrel Cage Induction
Insulation ........ Class B
SINGLE PHASE .................. Capacitor start/capacitor run.
Requires overload protection to be
included in control panel, except
SGVF2022L & SGVH2022L.
Requires Barnes Starter or Control
panel, which includes capacitors, or
capacitor pack.
THREE PHASE ................... Dual voltage 240/480 60Hz, 380-415
50Hz. Requires overload protection
to be included in control panel
NOISE EMISSION ............... Max. in Air 20dB-A, Submerged 14dB-A
SUBMERGENCE ................ Max Depth 30Ft. (9m)
OPTIONAL EQUIPMENT .... Seal Material, Additional Cable,
Impeller trims, impeller materials,
Moisture sensors (requires relay in
panel), Leg Kit P/N: 108339
PUMP SPECIFICATIONS:
inches
(mm)