11
of housing.
F-4.4) Cable Assemblies:
Power Cord -
Refi ll the cooling oil as outlined in paragraph
F-1.3. Make wire connections as outlined in paragraph F-4.3.
Insert female end of cable plug into housing bore aligning
timing mark with hole in terminal block (21) see Figure 14.
Compress cable plug with compression fl ange (16a) by
tightening hex bolts (11) into the housing (6). Torque to 132
in-lbs.
G-1 ORDERING REPLACEMENT PARTS:
When ordering replacement parts, ALWAYS furnish the follow-
ing information:
1. Pump serial number and date code. (Paragraph G-4)
2. Pump model number. (Paragraph G-3)
3. Pump part number. (Paragraph G-2)
4. Part description.
5. Item part number.
6. Quantity required.
7. Shipping instructions.
8. Billing Instructions.
G-2 PART NUMBER:
The part number consists of a six (6) digit number, which ap-
pears in the catalog. A one or two letter suffi x may follow this
number to designate the design confi guration. This number is
used for ordering and obtaining information.
G-3 MODEL NUMBER:
This designation consists of numbers and letters which rep-
resent the discharge size, series, horsepower, motor phase
and voltage, speed and pump design. This number is used for
ordering and obtaining information.
G-4 SERIAL NUMBER:
The serial number block will consist of a six digit number,
which is specifi c to each pump and may be preceded by a al-
pha character, which indicates the plant location. This number
will also be suffi xed with a four digit number, which indicates
the date the unit was built (Date Code).
EXAMPLE: A012345
0490
.
Reference the six digit portion (Serial Number) of this number
when referring to the product.
FIGURE 13
FIGURE 14
