3
DISCHARGE ...............................
1¼” NPT, Female, Vertical
LIQUID TEMPERATURE .............
150°F (66°C) Continuous
PUMP HOUSING .........................
Non-corrosive, may be
used in fresh or salt water (resulting from water softener
residue).
MOTOR
........................................Totally submersible, water
cooled for longer life
The BUS can provide added protection for your home when
installed.
With the battery backup sump pump system your pumping
power is never interrupted. The BUS switches automatically
to battery power when the power fails, and it pumps along
with your primary pump when there is more water coming
into your sump than your main pump can handle.
The BUS recharges automatically when power is restored
and monitors battery and power conditions constantly. It will
also detect irregularities, sounds an alarm and pinpoints
problems and solutions on the control panel.
The alarm will sound to these potential problems;
• Battery needs water
• Battery is old and needs to be replaced
• Battery is discharge
• Battery is defective
• Power plug is out of wall
• Power is out
• Charger needs to be replaced
• Pump has been activated
MODEL NUMBER
BUS
PART NUMBER
100940
PUMPING CAPACITY
1000 GPH @ 10 feet
POWER DRAW:
NOTE: The lower the AMP draw, the longer the pump will run on the battery.
6 Amps @ 12 Volts
CHARGER STRENGTH:
NOTE: The higher the AMPS, the faster the charger will recharge the battery.
0.4 Amps
Approx. time to recharge a fully discharged battery.
48 Hours
Approx. continuous pumping with recommended battery
6 - 12 Hours
A 12 Volt Deep Cycle Marine Battery is recommended (Not Supplied)
Summary of Contents for BARNES BUS Series
Page 13: ...Notes ...
Page 14: ...Notes ...
