background image

14

15

NOTICE!

Please note that the right 

pedal screws on clockwise and 

the left pedal counter clock-

wise.

4. Fasten the seat 

7

 to the seat pillar 

3

 using 3 hex head screws 

19

 and 3 

washers 

15

, and then insert it into the 

front main frame 

1

. Position the 

holes above one another and then 

fasten the seat to the pillar using the 

club knob 

9

. The club knob 

9

 can 

be used to set the correct seat height 

(see

 

Fig. E)

.

WARNING!

Risk of injury!

The mark MAX  

A

 on the seat 

pillar must be completely visible 

at MAXIMUM height 

(see

 

Fig. 

E)

.

NOTICE!

Setting the correct seat height 

is important. Sit on the seat 

and place your feet on the 

pedals. You should be able to 

move through a complete 

pedal stroke without locking your knees or shifting your hips on 

the seat. The seat is too close to the pedals if you have more than 

a slight bend in your knees at the bottom of the pedal stroke. The 

seat is too far from the pedals if you have to completely straight-

Assambling

Assambling

children, protruding into or 

located in the movement area, 

which could influence the 

training or cause injuries. We 

recommend a safety distance 

of 59” x 59” (150 cm x 150 cm) 

around the unit. Leave or store 

the X-Bike so that children 

cannot injure themselves.

Assembling

Setting up the X-Bike

CAUTION!

Risk of injury!

Improper set-up and 

use of the X-Bike may 

result in injury.
− When setting up the X-Bike, 

make sure not to squash 

your fingers.

1. Pull out the safety pin 

10

 

(see

 

Fig. B)

 

and then reinsert it into the appropri-

ate hole after fully unfolding the 

product 

(see

 

Fig. B)

.

2. Fasten the front stand, which has 

transportation wheels attached 

5

 to the front main frame 

1

 using 2 carriage 

bolts 

11

, 2 curved washers 

16

 and 2 M8 hex nut caps 

18

. Then fasten the rear 

stand 

6

 to the rear main frame 

2

 using 2 carriage bolts 

11

, 2 curved washers 

16

 

and 2 M8 hex nut caps 

18

 

(see

 

Fig. C)

.

3. The left and right pedals (

8L

 and 

8R

) are marked with “L” and “R” respectively. 

Mount the pedals to the corresponding cranks. When you are sitting on the bike, 

the right 

8R

 pedal is on your right 

(see

 

Fig. D)

.

1

18

2

18

18

16

16

16

6

5

11

11

 C

1

10

10

10

 B

1

21L

8R

8L

21R

 D

1

9

15

19

3

7

A

 E

Summary of Contents for 99481
























Reviews: