INSTRUCTION FOR THE CONNECTION OF A CONTROLER FOR
SOLAR PUMP MODEL - 3TSS1.38-55-36/210
Cable terminal scheme
Mode selection
I: Mode photovoltaic panel
0: Switched off
II: Mode accumulator
Scheme and connection sequence
a). Open the package and check the controller for transport damages
b). Please set the switch in mode “switched off” position “0” before connection
c). Connect the controller as it is shown on picture 1
1. Connect the pump (be careful for the polarity
U,V,W
)
2.
Connect the photovoltaic modules in series scheme to
X+
and
X-
3.
Connect the accumulator to
Y+
and
Y-
4.
Connect the level sensors to
TC, TH, WC, WL, WH
9
Summary of Contents for 3TSS1.38-45-36/210
Page 18: ...picture 1 18 ...
