manualshive.com logo in svg

CRANE PUMPS & SYSTEMS DEMING 7365 Series, Installation And Operation Manual

Share
Download
CRANE PUMPS & SYSTEMS DEMING 7365 Series Installation And Operation Manual Download Page 24

24

SECTION F: REPLACEMENT PARTS

 

F-1) Ordering Replacement Parts:

When ordering replacement parts, ALWAYS furnish the follow-

ing information: 

1. Pump serial number and date code. (Paragraph F-4)

2. Pump model number. (Paragraph F-3)

3. Pump part number. (Paragraph F-2)

4. Part description.

5. Item part number.

6. Quantity required.

7. Shipping instructions.

8. Billing Instructions.

F-2) Part Number:

This number is used for ordering and obtaining information. 

F-3) Model Number:

This designation consists of numbers and letters which rep-

resent the discharge size, series, horsepower, motor phase 

and voltage, speed and pump design. This number is used for 

ordering and obtaining information. 

F-4) Serial Number:

The serial number block will consist of a six digit number, 

which is specific to each pump and may be preceded by an al-

pha character, which indicates the plant location. This number 

will also be suffixed with a four digit number, which indicates 

the date the unit was built (Date Code). 

EXAMPLE: A012345 

0490

. 

Reference the six digit portion (Serial Number) of this number 

when referring to the product.

Summary of Contents for DEMING 7365 Series







































Reviews:

No comments

Brands by name

Popular brands

Load more brands