[R1] C.A.S.T. Input: Enables I/O relocation and
expansion via Cranborne Audio C.A.S.T. enabled
breakout boxes.
[R7] Preamp Output (+24dBu): Sends balanced,
line-level outputs of each Preamp for connection
to external converters and equipment.
[R2] Source Switch: Toggles the input source of each
preamp between C.A.S.T. Input and XLR.
(Switch Down = C.A.S.T. ON)
[R8] Aux Input: Connects analogue playback
sources from external audio interfaces directly
into Camden EC2’s monitoring paths. Inputs are
summed with the C.A.S.T. OUT RR Paths.
[R3] Preamp Input: Connects balanced XLR analogue
inputs into each Preamp. Input sensitivity varies
depending on the Input Type Switch on the front of
the preamp.
[R10] Grounding Post: Enables direct binding to
chassis ground to help eliminate ground loops in
specific setups.
[R4] Link Output: Outputs an unaffected, buffered
output to connect downstream equipment such as
guitar amplifiers in parallel to Camden EC2’s Hi-Z and
Line inputs.
[R15] C.A.S.T. Output: Enables Camden EC’2
Preamp signals to be sent directly to the C.A.S.T.
Inputs on another Cranborne Audio device.
C.A.S.T. Out also receives the Aux Mix (inc
Talkback) from the connected 500ADAT/500R8 for
monitoring on Camden EC2’s Aux mixers.
[R5] Preamp Output (+18dBu): Sends balanced,
line-level outputs of each Preamp for connection to
external converters and equipment.
[R11] Power: Provides Camden EC2 with power via
the provided external 24v 1A DC power supply. No
other power supply should be used.
[R6] Ground Lift: Lifts the ground of the preamp’s
XLR output to remove ground hum in applicable
setups.
(Switch Down = Ground Lift ON)
Camden EC2 User Manual
-Page 7-
©2020 Cranborne Audio Ltd
