Aux In/C.A.S.T. Level Control [F12]
The Aux In/C.A.S.T. Level Control [F12] adjusts the overall level of the Aux Inputs [R8] and
C.A.S.T. OUT [R9] RR into the Aux headphone bus. In application, this control would adjust the
level of the stereo playback incoming from an external playback source such as an audio
interface or mixer into the Aux Bus and headphone outputs.
The signal incoming from the Aux Input jacks [R8] and the C.A.S.T. Output [R9] RR Paths are
summed together before reaching this control and so can be used in tandem if required to
sum two discrete playback paths.
For more information how to use the Aux Input and C.A.S.T. Output simultaneously for
advanced monitoring, check out the
“Monitoring Two Playback Sources Using C.A.S.T.”
application guides
Aux Headphones Output [F16]
The Headphones Output [F16] is used for connecting headphones to Camden EC2’s
headphone amplifiers. The connection is made by a ¼” TRS connector that is found on popular
professional and prosumer headphones. For consumer headphones or earbuds with smaller
⅛” connectors, you can connect a suitable adapter to convert the ⅛” jack to a larger ¼” jack.
Splitters and headphone extenders can be used with Camden EC2 but please exercise caution
when connecting them to Camden EC2 as improper connections can cause damage to the
unit or degrade Camden EC2’s headphone performance.
Note:
Do not connect unbalanced ¼” TS cables such as guitar cables to Camden EC2’s
Headphones Output. These connections could short the leg to ground and cause a
spike in power consumption. Any damage caused to the unit as a result of
unsupported connections is not covered under the Cranborne Audio warranty.
Camden EC2 User Manual
-Page 22-
©2020 Cranborne Audio Ltd
