Getting Started
Controls and Connectors
[F1] Mojo Control: Adjusts the level of Mojo
analogue saturation. Bypasses Mojo and clicks off
when it’s turned fully anti-clockwise.
[F10] 48v Status Indicator: Bicolour LED that
displays 48v status.
Off = 48v Off, voltage fully discharged
Amber = 48v voltage charging/discharging
Red = 48v fully charged
[F2] Mojo Style Switch: Toggles the Mojo style
between 2 discrete styles: Thump & Cream.
[F11] Ch1 Level Control: Adjusts the level of the
Channel 1 preamp into the Aux Bus.
[F3] Signal Indicator: Bicolour LED that displays
incoming signal level and clip status.
Blue = -40dBu to -1dBu
Green = 0dBu to +20dBu
Amber = +21dBu to +23dBu
Red = +24dBu
[F12] Aux In/C.A.S.T. Level Control: Adjusts the
level of the rear Aux Inputs and C.A.S.T. OUT RR
into the Aux bus.
[F4] HPF Switch: Engages the 80Hz High Pass
(Low Cut) filter.
-3dB @ 80Hz.
(Switch Down = ON)
[F13] Ch2 Level Control: Adjusts the level of the
Channel 2 preamp into the Aux bus.
[F5] Polarity Switch: Inverts the polarity of the
input signal by 180°.
(Switch Down = ON)
[F14] Aux Headphone Level: Adjusts the main
level of the Aux bus to the Aux Headphones
output.
[F6] Gain Control: 12 position switched pot.
Adjusts the input sensitivity of the preamp from 8
to 68.5dB in 5.5dB increments.
[F15] Stereo Pan Switch: Sets the Pan position of
Ch 1 and Ch 2 to the Left and Right sides of the
Aux headphone output for monitoring stereo
signals.
(Switch Down = ON)
[F7] Input Type Switch: 3-way switch. Adjusts the
input Impedance and pad status of the preamp
Input to match the desired input type; hi-z, line, or
mic.
[F16] Aux Headphone Output: Used for
connecting Independent headphones to the Aux
and Monitor busses.
[F8] 48v Switch: Engages 48v phantom power
for the rear XLR connector onboard the 500 series
chassis being used with Camden 500.
(Switch Down = ON)
[F17] Power Switch: Safely powers on and off
Camden EC2. Tap to power on, press and hold to
power off.
[F9] Hi-Z/Line Input: Used to connect Line or Hi-Z
instruments directly into the preamp’s front
panel. Hi-Z/Line input interrupts rear XLR or
C.A.S.T. Input connections.
Camden EC2 User Manual
-Page 6-
©2020 Cranborne Audio Ltd
