[1] Mojo Control: Adjusts the level of
Mojo
analogue saturation. Bypasses Mojo
and clicks off when turned fully
anti-clockwise.
[10] 48v Status Indicator: Bicolour LED
that displays 48v status.
Off = 48v Off, voltage fully discharged
Amber = 48v voltage
charging/discharging
Red = 48v fully charged
[2] Mojo Style Switch: Toggles the
Mojo style between 2 discrete styles:
Thump & Cream.
[11] Preamp Level Control: Adjusts the
level of the Camden Preamp into the
Aux bus.
[3] Signal Indicator: RGB LED that
displays incoming signal level and clip
status.
[12] Aux In/C.A.S.T. Level Control:
Adjusts the level of the rear Aux Inputs
and C.A.S.T. OUT RR into the Aux bus.
[4] HPF Switch: Engages the 80Hz
High Pass (Low Cut) filter. -3dB @
80Hz.
(Switch Down = ON)
[13] EXT In Level Control: Adjusts the
level of the EXT IN jack into the Aux
bus.
[5] Polarity Switch: Inverts the polarity
of the input signal by 180°.
(Switch Down = ON)
[14] Aux Headphone Level: Adjusts the
main level of the Aux bus to the Aux
Headphones output.
[6] Gain Control: 12 position switched
pot. Adjusts the input sensitivity of the
preamp from 8 to 68.5dB in 5.5dB
increments.
[15] EXT IN Line Input: Connects a
mono, analogue playback source
directly into Camden EC1’s monitoring
path. EXT In is also sent to the second
‘T’ path of the C.A.S.T. Output.
[7] Input Type Switch: 3-way switch.
Adjusts the input Impedance and pad
status of the preamp input to match
the desired input type; hi-z, line, or mic.
[16] Aux Headphone Output: Used for
connecting headphones to the Aux
bus.
[8] 48v Switch: Engages 48v phantom
power for the rear XLR input
connector.
(Switch Down = ON)
[17] Power Switch: Safely powers on
and off Camden EC1. Tap to power on,
press and hold to power off.
[9] Hi-Z/Line Input: Used to connect
line or hi-z instruments directly into
the preamp’s front panel. Hi-z/line
input interrupts rear XLR or C.A.S.T.
input connections.
Page 3
©2020 Cranborne Audio Ltd
