Package Contents
So now your Camden EC1 is out of it’s packaging, you’re probably itching to
get it powered on and making music! But before you get started, please read
the sections below that will help guide you through the process of getting
Camden EC1 setup, plugged in, and ready-to-record as quickly as possible!
The following items can be found in the packaging alongside Camden EC1:
-
External power adapter
-
IEC cable
-
4 adhesive rubber feet
-
Quickstart Guide
Powering Procedures
Powering On
First, make sure your speakers/audio interface is switched off and any
headphones are disconnected. Briefly tap the power button located on the
top right of Camden EC1’s front panel. The power icon will illuminate blue
and you will see the Signal and 48v Indicator LED light up in sequence.
Powering Off
First, make sure your speakers are switched off and any headphones are
disconnected. Press and hold the power button for approximately 3 seconds.
The power icon will deluminate and you will hear the soft ‘clicking’ of the
relays indicating that the unit has been powered off.
Note:
Please follow these safe powering sequences carefully in order
to prevent any unwanted pops and spikes causing damage to
downstream audio components including speakers and
headphones.
Page 5
©2020 Cranborne Audio Ltd
