manualshive.com logo in svg

CRALTECH CM185SL-3G, User Manual, Page: 15 / 17

Share
Download
CRALTECH CM185SL-3G User Manual Download Page 15

ON SCREEN MENU

ENCODER SENSITIVITY

Used to adjust sensitivity of the encoder.

KEYS LIGHT

Used to enable/disable Keys Light.

TALLY UMD SOURCE

Used to select Tally and UMD Source. Values are: GPIO, RS-232, TSL. Tally can be displayed on UMD and/or 
with squares at the bottom of the image. 

EQUIPMENT ID

Used to set Equipment ID to identify it for Ethernet communications.
For TSL, the equipment ID is the Offset on the first UMD and Tally that will be used.
For example: To control 2 equipments with 8 inputs, first equipment will have ID 01 and the second equipment 
will have ID 09.

14

DISPLAY DATA CONV

Display Data Conversion

 is used to select the mode of data conversion form YCbCr to RGB for the display. 

Values are REC 601, REC 709. Default Value is REC 709.

Fn KEYS MODE

Used to configure direct keys. Values are: IMAGE, AUDIO, MARKERS, SCOPES, MULTI, LAYOUT, USER. 
These options locate adjustments in direct keys. USER option is used to select customized the direct keys. 
Customization of F1 to F11 direct keys explained in pag 3 of this manual.

SYSTEM MENU

15
01

IMAGE0

USER

ON

TSL

ON
ON

Small

00
00

No

Rec709

NO
NO

Backlight
Equipment ID
Encoder Sensitivity
Fn Keys Mode
Keys Light
Tally UMD Source
   Display on UMD
   Display Squares
OSD Size
OSD x/y Position
OSD Transparency
Start Calibration
Display Data Conv
Factory Default
Update Firmware

1. Select the 

SYSTEM

 menu and press the encoder to enter.

2. Press Menu Encoder to select the adjustment to be modified 
(adjustment will be marked in white), and use the encoder to adjust 
the value. Press Menu Encoder again to Exit adjustment 
(adjustment will be marked in grey), and continue navigating. 
3. Press 

ESC

 button to move back to main menu.

BACKLIGHT

Used to adjust backlight value (form 0 to 15). The backlight brightness affect to LED Backlight and not to signal.

SFX-3G By Craltech

IMAGE
COLOR
AUDIO
MARKERS
SCOPES
INPUT
DISPLAY
ALARMS
NETWORK

SYSTEM

OSD SIZE

Used to select OSD size. Values are: Small, Large

OSD x/y POSITION

Used to select OSD position.

OSD TRANSPARENCY

Used to select OSD Transparency.

UPDATE FIRMWARE

Used to update the monitor.

FACTORY DEFAULT

This option is used to reset the monitor. 

NOTE: This option will set Equipment ID to 01 (Factory value).

START CALIBRATION

Connect the Monitor to Light illusion software to create a table of the monitor.

Version 1

Updated 09/09/2020

CM185SL-3G

Summary of Contents for CM185SL-3G


















Reviews:

No comments