manualshive.com logo in svg

CRALTECH CM185SL-3G, User Manual, Page: 11 / 17

Share
Download
CRALTECH CM185SL-3G User Manual Download Page 11

10

DISPLAY MENU

3G01

OFF
OFF

Grey 1
Grey 1

OFF

Red

040

OFF
OFF

940

Magenta

064

Blue

ON

Layout
Pixel to Pixel 1:1
Format Info
Border Color
UMDs Color
Focus Assist
   FA Color
   FA Level
False Color
Y Exposure Check
   Y Range Max
   Y Max Color
   Y Range Min
   Y Min Color
Fast Mode

LAYOUT

Used to select a screen layout. Options are: Quad View, SDI1, SDI2, HDMI, CVBS, PaP    

ON SCREEN MENU

1. Select the 

DISPLAY 

menu and press the encoder to enter.

2. Press Menu Encoder to select the adjustment to be modified 
(adjustment will be marked in white), and use the encoder to adjust 
the value. Press Menu Encoder again to Exit adjustment 
(adjustment will be marked in grey), and continue navigating. 
3. Press 

ESC

 button to move back to main menu.

FORMAT INFO

Used to Enable/Disable visualization of source’s format information (resolution). This information will be 
displayed in right-up corner of the image.

BORDER COLOR

Used to select color of Border/Frame of the image in Quad View.

UMD COLOR

Used to select UMD color

SFX-3G By Craltech

SFP1 TO SDI1

This function activates input 1 of SFP Module. This input will be multiplexed with SDI 1 of the monitor.

SFP2 TO SDI2

This function activates input 2 of SFP Module. This input will be multiplexed with SDI 2 of the monitor.

IMAGE
COLOR
AUDIO
MARKERS
SCOPES
INPUT

DISPLAY

ALARMS
NETWORK
SYSTEM

PIXEL TO PIXEL 1:1

Used to Enable/Disable 1:1 Function.    

FOCUS ASSIST

Used to Enable/Disable Focus Assist Function. FA color can be modified using FA Color Function. Intensity of 
FA can be modified using FA Level Adjustment.

FALSE COLOR

Used to Enable/Disable False Color Function.  

Y EXPOSURE CHECK

Used to Enable/Disable Y Exposure Check Function. Maximum and Minimum range can be modified using Y 
Range Max and Y Range Min, and color for Underexposure and Overexposure can be modified.

FAST MODE

If FAST MODE is ON the image is displayed as full interlaced so a bit of flickering can be appreciated but the 
refresh on the image is faster (Best option for sports)
If FAST MODE is OFF the scan is turned into “PROGRESSIVE SCAN” that will remove the flickering. 

HDMI / DVI Input

Select between HDMI OR DVI. This input will be shown on the 3rd quadrant on quad-mode.

Version 1

Updated 09/09/2020

CM185SL-3G

Summary of Contents for CM185SL-3G


















Reviews:

No comments