NOTES:
1. Insert the small plug from the supplied AC/DC Adapter to the DC IN Jack on the rear of unit.
2. Connect the AC/DC Adapter to the wall outlet having AC 100-240V~; 50/60Hz.
To the wall outlet
This AC/DC Adaptor intended to be correctly orientated in a vertical or floor mount position.
To save energy, unplug the AC/DC Adaptor from the wall outlet if you may not use the unit
for an extended period of time.
4
POWER SOURCE
The Red
Standby Indicator on the front of unit will illuminate.
DC IN
DC 9V,1.5A
To the DC IN jack
on the rear of the unit.
Remove and discard the insulation film as illustrated on the right.
RELEASE
PUSH
OPEN
R2025
C
+
SN
Fig.1
Fig.2
Fig.3
If the button cell is drained, replace it by a new one as below:
1. Push and slide out the battery tray as Fig.1 below.
2. Replace the button cell with a new CR2025 button cell as the polarity
markings on the rear of the Remote Control as Fig.2 below.
3. Close the battery tray as Fig.3 below.
Follow these Battery Precaution when using a battery in this device:
1. Use only the size and type of battery specified.
BATTERY PRECAUTIONS:
2. Be sure to follow the correct polarity when installing the battery as indicated in the battery
compartment. A reversed battery may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries
with fresh ones.
Main Unit:
Remote Control:
:
First Time use
