Craig CHT988 Owner'S Manual Download Page 16

Craig warrants this product to be free from manufacturing defects in material and

 

workmanship under normal use for a period of 90 days from date of purchase. If service

 

is required, please return the product to the store where it was purchased for exchange;

 

or, pack the unit in the original packing material with all accessories if applicable, a copy

 

of your sales receipt and a Cashier’s check or Money Order for $10.00 (to cover shipping

 

and handling costs) payable to Craig Electronics Inc. For consumers in Canada, please

 

make sure that the cashier check or money order is redeemable through a U.S. bank.

 

Ship your product freight pre-paid. Your unit will be repaired, replaced or if the unit can

 

not be repaired or replaced, a refund will be forwarded to you within four weeks of receipt

 

of your unit. Please ship your unit to:

Craig Electronics 

Inc.

 

1160 NW 163 

Drive

 

Miami, Fl 

33169

This warranty is void if the product has been: a) Used in a commercial application 
or rental. b) Damaged through misuse, negligence, or abuse. c) Modified or repaired 
by anyone other than an authorized Craig service center. d) Damaged because 
it is improperly connected to any other equipment.
Note: This warranty does not cover: a) Ordinary adjustments as outlined in the 
Owner’s Manual which can be performed by the customer. b) Damage to equipment 
not properly connected to the product. c) Any cost incurred in shipping the product 
for repair. d) Damage to the product not used in the USA.

This  warranty  is  not  transferable  and  only  applies  to  the  original  purchase.  Any 
implied warranties, including the warranty of merchantability, are limited in duration to 
the  period  of  this  expressed  warranty  and  no  warranty  whether  expressed  or  implied 
shall apply to the product thereafter.

Under no circumstance shall Craig be liable for any loss or consequential damage arising 
out  of  the  use  of  this  product.  This  warranty  gives  specific  legal  rights.  However,  you 
may  have  other  rights  which  may  vary  from  state  to  state.  Some  states  do  not  allow 
limitations  on  implied  warranties  or  exclusion  of  consequential  damage. 
Therefore, these restrictions may not apply to you.

To Obtain Service on your Product

 

email:[email protected]

Printed in China 

CHT988_WC_E0CL2_B0US

LIMITED WARRANTY

Size: 148.5(W) x 210(H)mm (A5)

Summary of Contents for CHT988

















Reviews: