OPERATION
BT (Blue Tooth):
1.
Slide the Function Selector to “BT.” position to power on the unit and enter to BT (Blue Tooth) mode. The
“POWER” & “BT.” indicator will illuminate and the “BT.” indicator will blink.
2.
Power on the external BT Device and enter to searching mode. Start BT pairing as the on screen
instructions on the external BT Device. After paired, the “BT.” Indicator will stop blinking. (For details
pairing procedures, please refer to the user’s manual of your BT Device.).
Notes:
●
When the external BT player searched the unit, our model number “CD6920” will appear on the display of
external BT device.
●
Pairing code “0000” or “1234” may need to enter.
Normal operation after paired:
1.
Turn on the BT function of the external BT Device.
2.
Power on the unit and enter to BT mode as previous procedures.
3.
Wait a few seconds until the unit paired to the external BT Device automatically. (The “BT.” Indictor stops
blinking).
4.
Plays the music in the paired BT Device as usual.
5.
Turn the “VOLUME” knob to adjust the volume level as desire.
6.
When finished listening, slide the Function Selector to “OFF” position to shut off the unit.
NB: Using the control buttons on the paired BT Device to pause; skip or fast search the files as usual.
Radio:
1.
Slide the Function Selector to “RADIO” position to power on the unit and enter to radio FM mode. The
“POWER” indicator will illuminate.
2.
Turn the “VOLUME” knob to adjust the volume level as desire.
3.
Turn the “TUNING” knob to search and plays the desired FM station. or,
●
Press the
■
- AM/FM button to enter to radio AM mode, the “AM” indicator will illuminate. (To resume
to FM band, press the button again. The “AM’ indictor will not light).
●
Turn the “TUNING” knob to search and plays the desired AM station.
4.
When finished listening, slide the Function Selector to “OFF” position to p shut off the unit.
Antennas:
This unit has a built in AM/FM antennas, which provides adequate reception in most areas. If reception is weak,
turn or relocation the unit to improve the reception.
CD:
1.
Open the CD door then place a CD disc on the center spindle, with the printed label side up.
2.
Close the CD Door.
3.
Slide the Function Selector to “CD” position to power on the unit and enter to CD mode. The “POWER”
indicator will illuminate.
8
