Page 5
UNPACKING
Your sander has been shipped completely assembled and
ready for use. After removing it from the box, inspect it
carefully to make sure no breakage or damaged has occurred
during shipping. If any parts are damaged or missing, contact
your nearest Sears store to obtain replacement parts before
attempting to operate sander. A sanding disc pack and
owner's operating manual are included in the box.
KNOW YOUR SANDER
Before attempting to use your sander, familiarize yourself
with all operating features and safety requirements.
See
Figure 1.
WARNING:
If any parts are missing, do not operate your sander until
the missing parts are replaced. Failure to do so could
result in possible serious personal injury.
OPERATION
WARNING:
Do not allow familiarity with your sander to make you
careless. Remember that a careless fraction of a second
is sufficient to inflict severe injury.
ELECTRICAL CONNECTION
Your sander has a precision built electric motor. It should be
connected to a
power supply that is 120 volts, 60 Hz, AC
only (normal household current).
Do not operate this tool
on direct current (DC). A voltage drop of more than 10
percent will cause a loss of power and the motor will
overheat. If your tool does not operate when plugged into an
outlet, double-check the power supply.
SWITCH
See Figure 1.
To turn your sander
ON
, depress the switch trigger. Release
switch trigger to turn your sander
OFF
.
RANDOM ORBIT
The random orbit motion provides overlapping sanding
movements by combining orbital and turning motion. These
overlapping sanding movements provide fast cutting action
with excellent sanding results.
BACKING
PAD
FRONT
HANDLE
Fig. 1
SANDING DISC
REAR HANDLE
SWITCH
TRIGGER
LOCK-ON
BUTTON
Your sander is suitable for sanding with coarse, medium,
and fine grit sanding discs. It also includes a dust box for
dustless sanding.
See Figure1.
DUST BOX
Summary of Contents for sears 315.277170
Page 12: ...QUARK BACK PAGE ...
