Craftsman CMCS340 Instruction Manual Download Page 9

7

English

Important Safety Instructions for All 

Battery Chargers

 

WARNING: Read all safety warnings, instructions, 

and cautionary markings for the battery pack, 

charger and product. Failure to follow the 

warnings and instructions may result in electric 

shock, fire and/or serious injury.

• 

DO NOT attempt to charge the battery pack with 

any chargers other than a CRAFTSMAN  charger.

 

CRAFTSMAN 

 

chargers and battery packs are specifically 

designed to work together.

• 

These chargers are not intended for any uses other 

than charging CRAFTSMAN  rechargeable battery 

packs. 

Charging other types of battery packs may cause 

them to overheat and burst, resulting in personal injury, 
property damage, fire, electric shock or electrocution.

• 

Do not expose the charger to rain or snow.

• 

Do not allow water or any liquid to enter charger.

• 

Pull by the plug rather than the cord when 

disconnecting the charger.

 This will reduce the risk of 

damage to the electric plug and cord.

• 

Make sure that the cord is located so that it will not 

be stepped on, tripped over or otherwise subjected to 

damage or stress.

• 

Do not use an extension cord unless it is absolutely 

necessary.

 Use of improper extension cord could result in 

risk of fire, electric shock or electrocution.

• 

When operating a charger outdoors, always provide 

a dry location and use an extension cord suitable 

for outdoor use. 

Use of a cord suitable for outdoor use 

reduces the risk of electric shock.

The RBRC® Seal 

Please take your spent battery packs to an 
authorized CRAFTSMAN service center or 
to your local retailer for recycling. In some 
areas, it is illegal to place spent battery 
packs in the trash. You may also contact your local recycling 
center for information on where to drop off the spent 
battery pack. Do not place in curbside recycling. For more 
information visit 

www.call2recycle.org

. or call the toll free 

number in the RBRC® Seal. 
RBRC® is a registered trademark of Call 2 Recycle, Inc

Transportation

 

WARNING:

 

Fire hazard. Do not store, carry, or 

transport the battery pack so that metal objects 

can contact exposed battery terminals. 

For 

example, do not place the battery pack in aprons, 
pockets, tool boxes, product kit boxes, drawers, etc., 
with loose nails, screws, keys, coins, hand tools, etc. 
When transporting individual battery packs, make 
sure that the battery terminals are protected and well 
insulated from materials that could contact them and 
cause a short circuit. 

NOTE: 

Li‑ion battery packs should 

not be put in checked baggage on airplanes and must 
be properly protected from short circuits if they are in 
carry‑on baggage.

• 

Do not store or use the tool and battery pack in 

locations where the temperature may reach or 

exceed 104 °F (40 °C) (such as outside sheds or metal 

buildings in summer).

 For best life store battery packs in 

a cool, dry location.

 

NOTE: Do not store the battery packs in a tool with 

the trigger switch locked on. Never tape the trigger 

switch in the ON position.

• 

Do not incinerate the battery pack even if it is severely 

damaged or is completely worn out.

 The battery pack 

can explode in a fire. Toxic fumes and materials are created 
when lithium‑ion battery packs are burned.

• 

Do not expose a battery pack or appliance to fire or 

excessive temperature.

 Exposure to fire or temperature 

above 265 °F (130 °C) may cause explosion.

• 

Follow all charging instructions and do not charge the 

battery pack or appliance outside of the temperature 

range specified in the instructions.

 Charging improperly or 

at temperatures outside of the specified range may damage 
the battery and increase the risk of fire.

• 

If battery contents come into contact with the skin, 

immediately wash area with mild soap and water. 

If 

battery liquid gets into the eye, rinse water over the open 
eye for 15 minutes or until irritation ceases. If medical 
attention is needed, the battery electrolyte is composed of a 
mixture of liquid organic carbonates and lithium salts.

• 

Contents of opened battery cells may cause 

respiratory irritation.

 Provide fresh air. If symptoms 

persist, seek medical attention.

• 

Battery liquid may be flammable if exposed to spark 

or flame.

• 

Never attempt to open the battery pack for any 

reason. If the battery pack case is cracked or 

damaged, do not insert into the charger.

 Do not crush, 

drop or damage the battery pack. Do not use a battery pack 
or charger that has received a sharp blow, been dropped, 
run over or damaged in any way (e.g., pierced with a nail, 
hit with a hammer, stepped on). Damaged battery packs 
should be returned to the service center for recycling.

Storage Recommendations

The best storage place is one that is cool and dry, away 
from direct sunlight and excess heat or cold.  Store the fully 
charged battery pack out of the charger.

Battery Pack Cleaning Instructions

Dirt and grease may be removed from the exterior of the 
battery pack using a cloth or soft non-metallic brush. Do not 
use water or any cleaning solutions.

Fuel Gauge Battery Packs (Fig. B)

Some battery packs include a fuel gauge. When the fuel 
gauge button is pressed and held, the LED lights will 
indicate the approximate level of charge remaining. This 
does not indicate tool functionality and is subject to 
variation based on product components, temperature, and 
end-user application.

Summary of Contents for CMCS340





































Reviews: