SERVICE RECOMMENDATIONS
23
SERVICE RECOMMENDATIONS
PROCEDURE
FIRST
2
HOUR
BEFORE
EACH
USE
EVERY
8
HOURS
EVERY
10
HOURS
EVERY
25
HOURS
EVERY
50
HOURS
EVERY
100
HOURS
BEGINNING
EACH
SEASON
BEFORE
STORAGE
S
Tighten all screws and
nuts
√
√
√
S
N
O
Check Traction Clutch
Cable Adjustment
(See Cable Adjustment)
√
√
W
T
H
R
O
W
E
R
Check Auger clutch Cable
Adjustment
(See Cable Adjustment)
√
√
Adjust Drive Belts
√
√
√
Lubricate Chains and
Hex Shaft
√
√
Lubricate Auger Shaft
(See Shear Bolt Replace-
ment)
√
√
E
Oil, Check
√
√
√
N
G
Oil, Change
√
√
√
G
I
N
Check and Clean Spark
Plug
√
√
N
E
Replace Spark Plug
√
Clean and Inspect Spark
Arrestor
√
The warranty on this snowthrower does not cover items that
have been subjected to operator abuse or negligence. To re-
ceive full value from the warranty, operator must maintain
snowthrower as instructed in this manual. The following
Ser-
vice Recommendations
is supplied to assist operator to
properly maintain snowthrower. This is a check list only.
Adjustment referred to will be found in the ADJUSTMENT/
REPAIR section of this manual.
Maintenance, replacement, or repair of the emission control
devices and systems can be performed by any non-road en-
gine repair establishment or individual. Regular maintenance
will improve the performance and extend the life of the en-
gine.
AFTER EACH USE
1.
Check for any loose or damaged parts.
2.
Tighten any loose fasteners.
3.
Check and maintain the auger.
4.
After each use, remove all snow and slush off the
snowthrower to prevent freezing of auger or controls.
5.
Check controls to make sure they are functioning
properly.
6.
If any parts are worn or damaged, replace immediately.
Not
for
Reproduction
