Craftsman 944.361063, Owner'S Manual

Page: 13 / 28

13
Belt
Idler bracket
Engine pulley
Trimmer head pulley
Top belt keeper
Chassis
Flat idler
Nut
Spacer
Bot tom
belt
keep er
Idler assembly
Spacer
Bolt
V-idler
Flat idler
Control cable
Idler
spring
12. Position belt and idler assembly in
trimmer, reconnect idler spring and as-
semble idler to chassis.
13. Install belt around trimmer head pulley
and engine pulley.
14. Replace debris shield and tighten the
four (4) screws securely.
15. Replace chassis cover and tighten
screw securely.
Always use Craftsman replacement parts
to assure proper fi t and long life.
8. Remove belt from trimmer head pulley.
9. Note the position of the control cable
and idler return spring, then remove
idler assembly from chassis and re-
move belt and idler from trimmer.
10. Remove belt from idler assembly by
re mov ing bottom belt keeper and idler
pulleys.
11. Assemble new belt, idler pulleys and
bottom belt keeper to idler bracket.
Tighten pulley bolts securely.
NOTE: Be sure belt is inside top belt
keeper on idler assembly.
ENGINE
ENGINE SPEED
Your engine speed has been factory set.
Do not attempt to increase engine speed
or it may result in personal injury. If you
believe that the engine is running too fast
or too slow, take your unit to a Sears or
other qualifi ed service center for repair
and/or adjustment.
CARBURETOR
Your carburetor has a nonadjustable fi xed
main jet for mixture control. If your engine
does not operate properly due to sus-
pect ed carburetor problems, take your unit
to a Sears or other qualifi ed service center
for repair and/or adjustment.
IMPORTANT: Never tamper with the
engine governor, which is factory set
for proper engine speed. Over speed ing
the engine above the factory high speed
setting can be dangerous. If you think
the engine-governed high speed needs
adjusting, take your unit to a Sears or
other qualifi ed service center, which has
proper equip ment and experience to make
any nec es sary adjustments.