background image

5

Gun and Wand

Main Unit Pressure

Washer with Wheels

Handle

High Pressure Hose

Chemical Pickup Hose and Filter

Owner’s Manual

Nozzle Cleaning Kit

Engine Oil

Rubber Isolator and
Mounting Hardware

Handle Mounting

Hardware

Replacement O-Rings

ASSEMBLY

HAZARD

• Fuel or oil can leak or spill and could

result in fire or breathing hazard, serious
injury or death can result. Fuel or oil leaks
will damage carpet, paint or other
surfaces in vehicles or trailers.

• If pressure washer is equipped with a fuel 

shut-off valve, turn the valve to the off position
before transporting to avoid fuel leaks. If pres-
sure washer is not equipped with a fuel shut-
off valve, drain the fuel from tank before trans-
porting. Only transport fuel in an OSHA
approved container. Always place pressure
washer on a protective mat when transporting
to protect against damage to vehicle from
leaks. Remove pressure washer from vehicle
immediately upon arrival at your destination.

WHAT CAN HAPPEN

HOW TO PREVENT IT

The powerful spray from your pressure washer is capable of causing damage to surfaces such as
wood, glass, automobile paint, auto striping and trim, and delicate objects such as flowers and

shrubs. Before spraying, check the item to be cleaned to assure yourself that it is strong enough to resist damage from
the force of the spray. Avoid the use of the concentrated spray stream except for very strong surfaces like concrete and
steel.

Operating without flow of water will result in equipment damage. Operating the pressure washer with water supply
shutoff will void your warranty. You should never run this pressure washer for more than 2 minutes without pulling the
trigger to allow cool water to enter the pump and the heated (recirculated) water to exit. 

RISK OF INJURY AND

PROPERTY DAMAGE

WHEN TRANSPORTING OR 

STORING

Carton Contents

• Main Unit pressure washer with wheels

• Handle

• High Pressure Hose

• Chemical Pickup Hose and Filter

• Gun

• Wand

Bag Containing

Video Cassette

Owner’s Manual

Nozzle Cleaning Kit and Replacement O-Rings

Engine Oil

Rubber Isolator and Mounting Hardware

Handle Mounting Hardware

Video Cassette

Summary of Contents for 919.769010





















































Reviews: