6 - ENG
D20396
Model No.
Engine Horsepower
Compressor Displacement CFM
Compressor Bore
Compressor Stroke
Air Tank/Capacity Gallons
Approximate Unloader Reset Pressure
Approximate Unloader Blow-Off Pressure
SCFM @ 40 psig
SCFM @ 90 psig
SCFM:
Standard cubic feet per minute; a unit of
measure of air delivery.
PSIG:
Pounds per square inch gauge; a unit of
measure of pressure.
ASME:
American Society of Mechanical Engineers;
made, tested, inspected and registered to meet the
standards of the ASME.
CFM:
Cubic feet per minute.
Unloader Blow-Off Pressure:
All models are continu-
ously running outfits controlled by tank pressure when
the maximum tank pressure is obtained, the unloader
valve will blow-off. This will cause the compressor to
exhaust the air to the atmosphere and not the tank.
This decreases the load on the engine and allows it to
run at a near no-load condition.
Unloader Reset Pressure:
When the tank pressure
drops to a predetermined point, the unloader valve
closes. The tank pressure will now increase until it
reaches the unloader blow-off pressure.
919.157251
5
15.3
2 7/8"
2"
20 ASME
90
110
12.0
10.0
•AIR TOOLS:
Sanders
Drills
Impact Wrenches
Rachets
•AIR HOSE:
1/4" or 3/8" I.D.
in various lengths
The following accessories are available through the current general sales catalog or at full-line Sears stores.
•SPRAY GUNS
•BLOW GUNS
•AIR CAULKING GUNS
•AIR POWER WASHER
•SANDBLASTERS
•AIR BRUSH SET
•IN-LINE FILTERS
•TIRE CHUCKS
•PAINT TANKS
•AIR CARRY TANKS
•INFLATOR KITS
•QUICK CONNECTOR SETS
(various sizes)
•AIR PRESSURE REGULATORS
•OIL FOG LUBRICATORS
SPECIFICATION CHART
GLOSSARY
ACCESSORIES FOR USE WITH SEARS AIR COMPRESSORS
