Craftsman 316.79248 Operator'S Manual Download Page 2

2

• Avoid creating a source of ignition for spilled fuel. Do not start the

engine until fuel vapors dissipate.

• Move the unit at least 30 feet (9.1 m) from the fueling source and site

before starting the engine. Do not smoke. Keep sparks and open
flames away from the area while adding fuel or operating the unit.

• Never start or run the unit inside a closed room or building.

Breathing exhaust fumes can kill. Operate this unit only in a well
ventilated area outdoors. 

SAFETY WARNINGS FOR ELECTRIC POWERHEADS

• CORD SETS: Make sure your cord set is in good condition. When

using a cord set, be sure to use a cord that is heavy enough to
carry the current that your unit will draw. An undersized cord set
will cause a drop in line voltage resulting in loss of power and
overheating. See the operator’s manual for the unit that will power
this attachment for the recommended cord size.

• Inspect all extension cords and the unit power connection

periodically. Look closely for deterioration, cuts or cracks in the
insulation. Also inspect the connections for damage. Replace the
cords if any defects or damage appear.

• Prevent disconnection of the electric powerhead from extension

cord during operation by using a plug-receptacle retaining strap,
connector, or by making a knot as shown below:

READ ALL INSTRUCTIONS BEFORE OPERATING

• Carefully read and understand the operator's manual of the unit

that powers this attachment.

• Read this operating instruction manual carefully. Be thoroughly

familiar with the controls and the proper use of the equipment.
Know how to stop the unit and disengage the controls quickly.

• Do not operate this unit when tired, ill, or under the influence of

alcohol, drugs, or medication.

• Never allow children to operate the equipment. Never allow adults

unfamiliar with the instructions to use the unit. Never allow adults
to operate the equipment without proper instruction.

• All guards and safety attachments must be installed properly

before operating the unit.

• Inspect the unit before use. Replace damaged parts. Check for fuel

leaks. Make sure all fasteners are in place and secure. Replace
parts that are cracked, chipped, or damaged in any way. Do not
operate the unit with loose or damaged parts.

• Be aware of the risk of injury to the head, hands and feet.
• Clear the area of children, bystanders, and pets. At a minimum,

keep all children, bystanders, and pets outside a 50 feet (15 m.)
radius; there still may be a risk to bystanders from thrown objects.
Bystanders should be encouraged to wear eye protection. If you
are approached, stop the unit immediately.

SPECIAL SAFETY WARNINGS FOR GAS POWERHEADS 

• Store fuel only in containers specifically designed and approved

for the storage of such materials.

• Always stop the engine and allow it to cool before filling the fuel tank.

Never remove the cap of the fuel tank, or add fuel, when the engine is
hot. Never operate the unit without the fuel cap securely in place.
Loosen the fuel tank cap slowly to relieve any pressure in the tank.

• IMPORTANT SAFETY INSTRUCTIONS •

Read the Operator’s Manual and follow all warnings and safety

instructions. Failure to do so can result in serious injury to the

operator and/or bystanders.

FOR QUESTIONS, CALL 

1–800–659–5917

The purpose of safety symbols is to attract your attention to possible
dangers. The safety symbols, and their explanations, deserve your
careful attention and understanding. The safety warnings do not by
themselves eliminate any danger. The instructions or warnings they
give are not substitutes for proper accident prevention measures.

NOTE:

Advises you of information or instructions vital to the
operation or maintenance of the equipment.

SAFETY ALERT:

Indicates danger, warning or caution.

Attention is required in order to avoid serious personal injury.
May be used in conjunction with other symbols or pictographs.

DANGER:

Failure to obey a safety warning will result

in serious injury to yourself or to others. Always follow
the safety precautions to reduce the risk of fire, electric
shock and personal injury.

WARNING:

Failure to obey a safety warning can

result in injury to yourself and others. Always follow the
safety precautions to reduce the risk of fire, electric
shock and personal injury.

CAUTION:

Failure to obey a safety warning may result

in property damage or personal injury to yourself or to
others. Always follow the safety precautions to reduce
the risk of fire, electric shock and personal injury.

RULES FOR SAFE OPERATION

SYMBOL

MEANING

WARNING:

When using the unit, you must follow the

safety rules. Please read these instructions before operating
the unit in order to ensure the safety of the operator and any
bystanders. Please keep these instructions for later use.

WARNING:

Gasoline is highly flammable, and its vapors

can explode if ignited. Take the following precautions:

TABLE OF CONTENTS

Safety Rules  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Warranty  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Know Your Unit  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Assembly Instructions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Maintenance and Repair Instructions  . . . . . . . . . . . . . . . . . . . .7
Cleaning and Storage  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Specifications  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Parts List  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E9
Service Numbers  . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

Copy the serial number here:

S/N :

ITEM :

MODEL :

Copy the model and  parent part number here:

Before beginning, locate the unit’s model plate. It lists the model and
serial numbers of your unit. Refer to the sample plate below and copy
the information for future reference. 

WARNING:

To reduce the risk of electrical shock, use

only extension cords approved for outdoor use, such as an
extension cord of cord type SW-A, SOW-A, STW-A, STOW-
A, SJW-A, SJOW-A, SJTW-W or SJTOW-A. Extension
cords are available from your local retailer. Use only round-
jacketed extension cords approved for outdoor use.

Extension

Cord

Power Head

Cord

Power Head

Cord

Extension

Cord

Summary of Contents for 316.79248





















Reviews: