8 - English
FEATURES
WARNING:
If any parts are damaged or missing do
not operate this product until the parts are replaced.
Use of this product with damaged or missing parts
could result in serious personal injury.
WARNING:
Do not attempt to modify this product
or create accessories not recommended for use with
this product. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING:
To prevent accidental starting that
could cause serious personal injury, always remove
the battery pack from the product when assembling
parts.
UNPACKING
This product requires assembly.
Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if it is not
completely assembled or if any parts appear to be
missing or damaged. Use of a product that is not
properly and completely assembled could result in
serious personal injury.
Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
If any parts are damaged or missing, please call
1-800-932-3188 for assistance.
PACKING LIST
Angle Grinder with Guard
Grinding Wheel
Side Handle/Wrench
Operator’s Manual
ASSEMBLY
KNOW YOUR ANGLE GRINDER
See Figure 1, page i.
The safe use of this product requires an understanding
of the information on the product and in this operator’s
manual as well as a knowledge of the project you are
attempting. Before use of this product, familiarize yourself
with all operating features and safety rules.
C3 ENERGY INDICATOR WINDOW
The C3 energy indicator window located on the side of
the handle, just above the base, will light when a PP2010
or PP2000 Craftsman 19.2 V lithium-ion battery pack is
installed and has charge.
NOTE:
Feature will not light with Craftsman 19.2 V nickel-
cadmium battery packs.
LOCK-OFF BUTTON
Your grinder is equipped with a lock-off button which
reduces the possibility of accidental starting.
SIDE HANDLE with WRENCH STORAGE
The side handle can be installed on the top, left, or right
side of the grinder for stabilization and must be used
during all operations. The wrench can be conveniently
stored in the side handle storage slot when not in use.
SPINDLE LOCK
The spindle lock secures the spindle so that only one
wrench is needed to change the grinding wheel.
TOOLLESS GUARD
A toolless guard deflects sparks and metal chips during
use.
PRODUCT SPECIFICATIONS
Grinding Wheel Capacity .......................................4-1/2 in.
Motor ..............................................................19.2 Volt DC
No Load Speed ..................................... 6,500 r/min. (RPM)
Spindle Thread ............................................. 5/8 x 11 UNC
