8
ASSEMBLY
Installing the Chute Rotation Control Assembly
1.
Remove the four hex washer screws from the back of the handle (two on
each side). See Figure 6.
Figure 6
2.
Using the four hex washer screws, install the chute rotation control
assembly. See Figure 7.
Figure 7
Installing the Chute
1.
Remove the hex washer screws in the chute base. See Figure 4.
Hex
Washer
Screw
Figure 4
2.
Align the holes in the chute base with the holes in the lower chute and
secure with the previously removed hex washer screws. See Figure 5.
Figure 5
Summary of Contents for 247.887822
Page 47: ...NOTAS 47 ...
