30
31
Fig. Z
TOP VIEW
Laser line
Cutting line
Blade
Laser line
Workpiece
Cutting
line
Fig. AA
2
1
B.
Adjusting the Position of the
Laser Line (Fig. AA, BB, CC)
Front Line (Fig. AA, BB)
If the laser line is angled from left to
right, turn the laser vertical adjustment
knob (1) counterclockwise to align the
laser line parallel with pattern line. If the
laser line is angled from right to left, turn
the knob clockwise to align the laser line
parallel with pattern line.
Top Line (Fig. AA, CC)
If the laser line is angled from left
to right, turn the laser horizontal
adjustment knob (2) clockwise to align
the laser line parallel with pattern line.
If the laser line is angled from right to
left, turn the knob counterclockwise
to align the laser line parallel with
pattern line.
After performing the above adjustments,
visually check that both the front
and top laser lines are parallel with
pattern line.
NOTE:
●
Laser line is calibrated and set up to
project to the left of the blade.
●
If you have any problem or
questions concerning the Laser
Trac
®
, call the following number for
assistance: 1-800-843-1682.
Fig. CC
Counterclockwise Clockwise
Laser line
Pattern line
Fig. BB
Laser line
Pattern line
Clockwise Counterclockwise
