Page 12
Insert the roller assemblies (L) into
the mounting slots (Fig. 13).
2. Adjust the height of the roller
assemblies (L) as needed.
3. Lock the roller assembly in
position by tightening the
locking knob (K) (Fig. 14).
4. The roller assemblies can also
use as a stationary stop guide,
and work as positive stops for
repetitive cuts.
ROLLER OPERATION
When working on a long workpiece,
the extension bars and rollers
are needed.
The roller can be used as a stop
guide or a single directional roller.
•
When using the roller as stop
guide, place the workpiece
against the plate; the roller
assembly works as an stop
guide to cut the workpieces to
the length required (Fig. 15).
•
When using the roller assembly
as a single roller, place the
workpiece on the roller for
convenient operation (Fig. 16).
Fig. 14
K
Kerf
Fig. 16
Fig. 13
Mounting
slot
Stop guide
L
Fig. 15
Stop guide
Steel plate
MOUNTING THE
ROLLER ASSEMBLIES
1.
16491 Manual_Revised_1
-0
Summary of Contents for 130.16491
Page 34: ...Página 34 16491 Manual_Revisado_18 0828 ...
Page 35: ...Página 35 16491 Manual_Revisado_18 0828 ...
Page 36: ......