5
Items Needed:
1/4-20 x 5/8” Carriage Bolt (Qty: 6)
11/32” Washer (Qty: 6)
1/4-20 Serrated Flange Nut (Qty: 6)
Process:
NOTE: Top and bottom shelves should have slots facing
toward back of unit. Install top shelf first.
• Insert shelf from bottom of unit.
• Place in desired mounting location in back of unit, and
rotate into place as shown.
• Attach using (2) carriage bolts, (2) washers, and (2)
nuts in square mounting holes as shown.
• Repeat until all (3) shelves are in place.
• Finger tighten.
Bolt
Washer
Nut
Flanges
toward bottom
Top
Bottom
NOTE: Shelves may be organized in several different
configurations. Below is the recommended initial shelf
spacing. Top and bottom shelf spacing may be adjusted as
necessary.
Top
Bottom
Middle shelf MUST be in
this position, with lock slot to
the front, for door to lock
Items Needed:
1/4-20 x 5/8" Carriage Bolt (Qty: 4)
1/4-20 x 3/4" Button Head Screw (Qty: 8)
11/32" Washer (Qty: 4)
1/4-20 Serrated Flange Nut (Qty: 12)
Process:
• Insert bottom into lower end of assembly and attach
using(4) carriage bolts, (8) screws, (4) washers, and
(12) nuts.
• Finger tighten.
Bottom
Screw
Nut
Use Washer
with Bolt
Bolt in
square
holes
Slot
