|
-17-
•
Take care when handling gasoline. Avoid direct
contact with the skin and avoid inhaling fuel vapor.
Fueling
1. Before fueling, clean the filler cap and the area
around it to ensure that no dirt falls into the fuel
tank.
2. Turn the fuel cap by turning it counterclockwise,
loose a bit of the fuel cap carefully so as to allow
any pressure build-up in the fuel tank to release
slowly. Never remove the fuel cap when engine is
running!
3. Use clean, fresh, regular unleaded fuel with a
minimum octane rating of 87 and an ethanol
content of less than 10% by volume.
4. Slowly add fuel to the tank. Do not overfill. Fuel can
be forced out of the tank as a result of expansion if
it is overfilled, and can affect the stable running
condition of the machine. When filling the tank, it is
recommended to leave enough space for the fuel to
expand. A minimum of 13mm (0.5inch) of space
below the bottom of the filler neck to provide space
for expansion.
5. Tighten the fuel cap clockwise securely after
fuelling.
6. Wipe away any spilled fuel.
Detergent
NOTICE
This pressure washer is intended for use with special
pressure washer detergents only. Follow the detergent
manufacturer’s directions, only use recommended
detergents for pressure washers. Using detergents not
specifically recommended for use with pressure
washers can cause damage to pump and other
pressure washer components.
Damage caused to
pressure washer by using non-recommended detergent
is not covered under warranty.
NOTICE
Do not use powdered soaps which clog the injection
system.
NOTICE
Working with a detergent ensures quick soaking of the
dirt, and allows the high-pressure water to penetrate
and remove the dirt more effectively. Always spray
detergent on a dry surface, do not presoak the area.
Soaking the surface dilutes the detergent and reduces
its cleaning ability.
Some cleaning jobs can be completed by using only
water, but for most, it is advantageous to use a
detergent to penetrate and remove the dirt more
effectively. When using pressure washer approved
detergent, make sure the surface is clean and dry.
Wetting the surface first is not recommended; it will
dilute the detergent and will reduce the cleaning
effectiveness.
Add detergent
1. If need, add the detergent to a separate container
and dilute it with water at the ratio specified by the
detergent manufacturer. Do not dilute it in the
pressure washer detergent tank.
2. Turn the detergent tank cap counterclockwise to
open the cap.
3. Add detergent into the tank. Do not overfill. If
necessary, a funnel is recommended to use here.
This pressure washer is intended for use with
pressure washer detergents only.
Detergent
4. Turn the detergent tank cap clockwise to tighten the
detergent cap securely.
5. Wipe away any spilled detergent.
NOTICE
When finished with detergent, squeeze spray trigger
and continue cleaning with clean cold water, this can
help flush some detergent residue in the machine and
accessories.
