Desconecte la energía:
Siempre corte la energia en el disyuntor o desconecte el fusible cuando
instale o repare este o cualquier otro aparato electrico.
NO HACER
ESTO PUEDE
RESULTAR EN
LESIONES
GRAVES O
INCLUSIVE
LA MUERTE.
Precaución
3. HERRAMIENTAS
•
Destornillador Phillips
•
Destornillador de
cabeza plana
•
Pelacables
•
Nivel de constructor
4. CABLEADO
Cablee el suministro eléctrico a la ubicación de la unidad
a.
Asegúrese de consultar los códigos eléctricos locales antes de comenzar
el trabajo eléctrico.
b.
Utilizando tubo-conducto de conformidad con los códigos locales, cablee
el suministro eléctrico dentro del tubo-conducto desde la fuente de
energía a la ubicación de la unidad.
c.
Extienda por lo menos 100 pulgadas de cable de reserva al extremo del
tubo-conducto en la ubicación del poste para permitir el cableado de
la(s) unidad(es) de poste.
Seleccione un lugar para la instalación
Considere los siguientes puntos cuando seleccione un lugar para la instalación:
•
No sitúe el poste a menos de 16 pies del muro interior de una piscina.
•
Evite situar el poste demasiado cerca de los caminos de entrada para
evitar dañarlo con los vehículos.
2. UBICACIÓN
1. Pautas
• Este poste fue armado por un empleado competente de la fábrica de
Craftsman. Es necesario armar ciertas partes antes de usar. Siga
cuidadosamente las instrucciones de instalación.
• Cuando use este poste exterior de enterrado directo, siempre se deben
tomar precauciones básicas de seguridad para reducir el riesgo de incendio,
electrochoque y lesiones personales.
• La célula fotoeléctrica en el poste no es adecuada para usarse con lámparas
que utilizan bombillas fluorescentes o de más de 300 vatios. Las instalaciones
fijas de la fotocelda prenderán automáticamente al atardecer y la vuelta
de al amanecer.
• Seleccione una lámpara con una potencia máxima de 300 vatios (lámpara
no incluida)
IMPORTANT! PLEASE READ:
All Craftmade lanterns are prepared with a durable lacquer finish or a powder-coated/painted finish.
Please note that the brass finish or painted finish on exterior lanterns will weather or tarnish over time,
depending upon the environmental conditions where the lantern is installed. Your proper care of lanterns
(see below) will enhance both the life and appearance of the lanterns. Post treatments, such as clear lacquer,
are not recommended.
PROPER CARE
In order to maximize the appearance of a Craftmade brass lantern, it is important that dust and debris is
removed from the surface of the lantern periodically. It is recommended that the lanterns be wiped down
weekly using a soft, dry or damp cloth.
DO NOT use any abrasives such as car wax, brass cleaners or other polishes, glass cleaners or chemicals,
as this will scratch/remove/damage the protective coating, allowing moisture and pollutants to come in
contact with the brass, which will result in discoloration and pitting.
ALL Craftmade cast aluminum lanterns receive a durable powder coat finish, which enhances the durability
of the lantern. This finish should also be wiped down weekly with a soft, dry or damp cloth to remove the
dust and debris that will accumulate on the surface. DO NOT use any abrasives such as car wax, brass
cleaners or other polishes, glass cleaners or chemicals as this may damage the finish.
FAILURE TO FOLLOW THE ABOVE CARE INSTRUCTIONS WILL VOID THE WARRANTY OF THE
LANTERN.
For information regarding replacement parts, please write to:
Craftmade, P.O. Box 1037, Coppell, TX 75019
LIMITED WARRANTY
Craftmade warrants against defects in materials or workmanship for a period of ONE (1) YEAR from date
of purchase for use, and agrees to repair or, at our option, replace a defective unit without charge. Brass
finish is covered 90 days from purchase date.
IMPORTANT: This Warranty does not cover damage resulting from accident, misuse or abuse, lack of
reasonable care (see above), the affixing of any attachment not provided with the product, alteration of any
attachments factory installed, loss of parts or subjecting the fixture to any but the specified electrical service.
This warranty does not cover failure of bulbs due to accidents, abuse, misuse, vandalism, power surges,
and acts of nature such as lightning damage or any bulbs purchased separately and installed by the
consumer or any damage to the fixture caused by a separately purchased bulb.
No responsibility is assumed for any special incidental or consequential damages. Damages occurring
during transit are not covered by this warranty.
To obtain warranty service, mail sales receipt as proof of purchase-date, and a brief explanation of the
nature of the defect, to P.O. Box 1037, Coppell, TX 75019. You will receive, by mail, a Return Goods
Authorization number issued by Craftmade, and returned freight prepaid.
For Installation or Technical Support, call 1-800-486-4892, 8 a.m. - 5 p.m., Central Time, Monday-Friday.
Please send the following information…
1. The Model Number and Finish – Polished, Antique, White, etc.
2. The name of the part – if you have a parts problem.
3. Your name, mailing address and phone number
(with area code).
important
If fixture does not work:
1. Turn off electrical power and check all wire connections.
2. Check fuse or circuit breaker and replace if necessary.
3. Check to make sure light bulb is in working order.
4. Ensure that dimmer switch is in the "on" position.
Troubleshooting
E5
S2