7. Attachment of Motor Housing.
page 5
8. Blade Assembly.
6. Fan Assembly.
Carefully push wiring and wire nuts into
outlet box.
Align 4 holes in bar at top of motor assembly
with 4 holes in hanging bracket. Secure
motor assembly to hanging bracket with 4
motor mounting screws and lock washers
that were previously removed (
page 3,
Section 4
).
[
Note
: It is extremely important to
tighten the
screws so
that fan can be mounted securely.]
Raise motor housing to hanging bracket to
align screws on internal top rim of motor
housing with slotted holes on hanging
bracket. Twist motor housing to lock.
Time Saver:
Washers for blade screws can be set
on each blade screw prior to installing blades.
Locate 6 blade attachment screws in one of the
hardware packs. Align blade holes with motor
screw holes,
turn blade so that the 3 small holes
on each outer edge of blade are facing up towards
the ceiling,
and attach blade with blade screws.
[
Note
: Use slot located on switch housing plate
for easy access to motor screw holes.] Before
securing screws permanently, repeat with the
other blade . Secure all screws with a Phillips
screwdriver.
Note
: Tighten blade screws twice a year.
hanging
bracket
motor assembly
motor housing
blade attachment
screws and washers
switch housing slot
blade
"bar"
hanging bracket
motor housing
slotted holes
screws
