page 8
6. Wiring.
7. Wiring - Wall Control
Remove existing wall switch. Wire the
wall
control
as shown in diagram at right.
Connect
BLACK/WHITE
wire from wall control
to
BLACK
(
AC IN L
)
wire in outlet box. Connect
BLACK
wire from
wall control to
BLACK
(
AC IN
N
) wire from fan (inside the outlet box).
Connect
BLUE
wire from wall control to
BLUE
wire from light in the outlet box.
Connect
GREEN/YELLOW
ground wire from wall control to
ground wire in the outlet box.
Use wire connectors
provided when making connections.
*Wrap each wire connector separately with
electrical tape as an extra safety measure.
Gently push wires and taped wire connectors
into outlet box.
Attach wall control to outlet box and secure
with screws from original wall switch. Attach
plate (included) to wall control using 2 screws
provided with the wall control.
plate
wall control
plate
screw
outlet box
BLACK
(AC IN N
from fan)
BLACK
BLUE
GREEN/
YELLOW
BLACK
(AC IN L)
BLACK/WHITE
green/
bare
ground
BLUE
* Wrap each wire connector separately with
electrical tape as an extra safety measure.
WARNING:
Turn off circuit breakers to current fixture
from breaker panel and be sure operating light switch is
turned to the OFF position.
CAUTION
:
Be sure outlet box is properly grounded and
that a ground wire (
GREEN
or Bare) is present.
Make sure all electrical connections comply with Local
Codes or Ordinances and the National Electrical Code. If
you are unfamiliar with electrical wiring or if the
house/building wires are different colors than those
referred to below, please use a qualified electrician.
Note
:
Excess lead wire length from the fan can be
cut to the desired length and then stripped.
When downrod is secured in place on the hanging
bracket, electrical wiring can be made as follows:
Connect
BLACK
and
BLUE
wire from fan to
BLACK
wire
from ceiling with wire connector provided.
Connect
WHITE
wire from fan to
WHITE
wire from
ceiling with wire connector provided.
Connect all
GROUND
(
GREEN
) wires together from fan
to
BARE
/
GREEN
wire from ceiling with wire connector
provided.
If you intend to control the fan light with a separate
light switch, connect
BLUE
wire from fan to the
BLACK
(or
RED
) supply from the independent switch.
black
black
white
white
blue
black supply wire
ground
(green
or bare)
white supply wire
*
from ceiling
from fan
ground
(green or bare)
