page 11
11. Automated Learning Process./Activating Code.
CAUTION
:
The wall and/or handheld remote control can be programmed to multiple receivers or fans. If this is not
desired, turn wall switch off to any other programmable receiver or fan.
Restore electrical power and then, if using wall control, set slider switch on wall control to the ON position.
Within 60 seconds of turning on the wall control, press and hold the fan
OFF
button on the wall control for 5
seconds or until light blinks twice.
Turn power off again for at least 5 seconds
and then turn power back on. Within 60 seconds of restoring the
power, press and hold the fan
OFF
button on the front of the handheld remote control for 5 seconds or until
light blinks twice.
Test the light and fan functions to confirm the learning process is complete--
see Section 14.
12. Remote/Wall Control Operation.
wall control
handheld
remote control
ON/OFF
slider switch - turns
wall control
ON or OFF
(switch not functional on handheld remote)
HIGH
button - turns
fan
to HIGH speed
MED
button - turns
fan
to MEDIUM speed
LOW
button - turns
fan
to LOW speed
OFF
button - turns
fan
OFF
L
button
-
turns
light kit
ON/OFF when pressed once;
dims
light kit
when pressed and help down.
