page 10
9. Light Kit Assembly (Optional).
Remove 1 screw from motor plate on
underside of motor housing and partially
loosen the other 2 screws. Align slotted
holes in fitter plate with loosened screws
in motor plate, allowing molex
connections from motor housing to
come through holes in midde of fitter
plate. Twist fitter plate to lock. Re-insert
screw that was just removed and
securely tighten all 3 screws with a
Phillips screwdriver.
Remove 1 screw from underside of fitter
plate and partially loosen the other 2
screws.
Connect
WHITE
wire from LED light kit
to
WHITE
wire from motor housing.
Connect
BLUE
(or
BLACK
) wire from LED
light kit to
BLUE
wire from motor
housing. Be sure that molex connections
snap together completely.
Carefully arrange wiring within fitter
plate. Align slotted holes in LED light kit
with loosened screws in fitter plate. Twist
LED light kit to lock. Re-insert screw that
was previously removed and tighten all 3
screws securely.
Locate slots on shade and align with
nodules on inside of fitter plate.
Gently
push up on shade and turn
to the RIGHT
(clockwise)
until it slides completely into
place.
If you do NOT wish to use the light kit
,
locate slots on metal cover and align
with nodules on inside of fitter plate.
Gently push up on metal cover and turn
to the
RIGHT (clockwise)
until it slides
completely into place.
WARNING
: Metal cover will be HOT if
light is left on.
shade
slots
metal cover
motor housing
motor housing
LED light kit
motor plate
fitter plate
fitter plate
nodules
slots
motor housing
fitter plate
nodules
molex
connections
